#Updating planeplotter install#
#Updating planeplotter update#
#Updating planeplotter manual#
#Updating planeplotter software upgrade#

Release 151204.08.00.30 was an intermediate release only and is superseeded by Release 151210.19.00.30. During this time, your GPS LED will not become green, also there won't be a feeder working.

NOTE: After power on, the GPS may require up to 5 minutes until synchronisation.

Logout screen is not properly displayed.

In this case, continue with the two commands If within the output you identify a Linux version 3.8, you're Radarcape is still on Angstrom. Once on the command prompt, enter the command uname -a Using Putty terminal, enter Hostname radarcape, port number 22 and Connection Type SSH.

#Updating planeplotter manual#

If you however cannot reach your maintenance menue (by whatever means), you will need to do a manual installation through the command prompt.

#Updating planeplotter install#

Pressing the button will then install this new release.

Those who already updated to the intermediate release 151204.08.00.30 should find this new version under Configuration - Software Maintenance - Upgrade Radarcape Softare. The erroneous release 1121.19.20.30 was removed from the server December a login as Administrator results in an empty web page return.

Flightradar24 and FPGA version were added to the System Information web page.

(Please note that the FR24 feeder is an external delivery and not under the same maintenance process like the rest of the firmware).

The Flightradar24 feeders in the previous Debian releases provided wrong locations to the server.

Surface positions can be wrong by -90В°, 90В°, or 180В°.

Fixed: Occassional timestamp jumps in P30003 messages.

Fixed: Access control for JSON, KML, and TXT files via web interface.

Fixed: Local clients cannot connect to UDP ports via loopback interface.

Fixed: Do not decode frames with ICAO equal to 0x000000 or 0xFFFFFF.

Fixed: Download location of basestation.sqb.

Factory reset function for the GPS module.

Support of GLONASS (Only new Radarcape hardware releases with SMT360 GPS receiver).

Filters for altitude, speed, distance, ICAO hex codes on the 2D Map.

Configuration of static IP address via web interface.

Fixed: FPGA does no longer output dublicate frames in certain operation modes.

Fixed: Map API key can now be configured via the configuration page.

Fixed: Incorrect decoding of DF-17 surface positions.

Fixed: Incorrect timestamp output in 12 MHz clock mode.

Angstrom devices may be inaccessible by SSH after a package installation and require a reboot.ДЄngstrom radarcaped-161030.00.00.30.opk Release_160928.00.00.30.

#Updating planeplotter software upgrade#

Disable FR24 feeder prior to the software upgrade and re-enable it when the new software release was installed successfully.After power on, the GPS may require up to 5 minutes until synchronisation.Logout screen is sometimes not properly displayed.

#Updating planeplotter update#

Fixed: FR24 feeder does sometimes not stop during update.

See now on the dedicated pages for Radarcape:Software_Features_Major2#Major_2_Related_Pages Release_161030.00.00.30 Starting with November 2013, the release strategy will be Linux installer packages, which include the Linux software as well as the FPGA firmware.ДЄfter, the Radarcape software is released as 'Major 2' because of significant changes.

2.5 FPGA Firmware meaADSB_ep3_141_gpsmlat-2.

2.4 FPGA Firmware meaADSB_ep3_141_gpsmlat-3.

2.3 FPGA Firmware meaADSB_ep3_143_ppsjump-020.

2.2 Linux and FPGA firmware package ppsjump-021 (23.

1.24 Release 131126.19.46: Configuration Page Issues Solved.

1.18 Release_140106.13.29 - Planeplotter Feeder, Ground Decoding.